In the process of development, when compared with the previous process, there must be some kind of advantage, and this advantage can also be regarded as the main feature of industrial transformation. At the same time, in the process of change, the quality of the product and its role and effect are required to be higher. For the UVLED curing system, after comparing with the traditional process, it will be found that there are many features that must be possessed by the production of modern society.
For example, the service life of the product. The mercury lamp is used as the main light source in the traditional UV curing equipment, and the service life is about 800 to 3000 hours. Compared with previous products, it is about ten times higher.
In other words, when the traditional mercury lamp method is used for curing, the temperature of the surface of the product will rise to about 60 to 90 degrees during the irradiation process. Impact. In other words, the positioning of the product is displaced, and if the UVLED curing system is used for curing, the surface temperature of the entire product will not exceed 5 degrees Celsius. At this time, the needs of more products can be met.
Then from the perspective of environmental protection, in the traditional curing mode, mercury lamps are used to emit light. The presence of mercury in the bulbs is a problem whether it is treated as waste or transported. Improper handling will cause very serious pollution to the environment. The UVLED curing system does not have this problem, using semiconductors to emit light, which is more environmentally friendly.
As a manufacturer of UVLED curing equipment, Shenzhen Height-LED is committed to providing customers with a complete set of curing solutions. The products have standard products and can also customize products according to customer needs. If you have UVLED curing requirements, welcome to consult.